When active door is open, the coordinator prevents active door from closing until inactive door bypasses.
Closing of inactive door causes strike plate on top of door to contact cam and lift arm, allowing active door to close.
When inactive door continues closing, roller rides over strike plate on to door bracket, holding arm above active door.
Used with door closer to make sure the doors is closed properly and completely.
Used for heavy duty double door of commercial buildings
Availability: | |
---|---|
D003
Goldtech
All bar coordinators are equipped with an adjustable override feature which allows the active door to close under extreme pressure.
All bar coordinators are compatible with flush bolts.
The bar coordinator don't cover the entire length of the stop, so a filler bar can be provided to maintain architecturally clean lines.
Material: Stainless steel 304
Finish: Satin stainless steel
For openings where doors are unequal size, the coordinator length should equal the active door width plus approximately 1/2 the inactive door width. The coordinator must be 6" longer than the active door width and shorter than the overall frame opening between stops.
All bar coordinators are equipped with an adjustable override feature which allows the active door to close under extreme pressure.
All bar coordinators are compatible with flush bolts.
The bar coordinator don't cover the entire length of the stop, so a filler bar can be provided to maintain architecturally clean lines.
Material: Stainless steel 304
Finish: Satin stainless steel
For openings where doors are unequal size, the coordinator length should equal the active door width plus approximately 1/2 the inactive door width. The coordinator must be 6" longer than the active door width and shorter than the overall frame opening between stops.
Established in 2011, Goldtech started the journey of being a leading and reliable supplier in developing and manufacturing architectural hardware, including door hardware, shower hardware, glass door Fittings and accessories.